The best DVR AHD 1080N 4CH on the market! If you compare the technical specifications with the price you will understand this. Buy from ChinaMAG now.
0 Item Items
It will be delivered in 7-45 days.
Warning: Last items in stock!
|Resolution||1080N / AHDM720P / 960H / D1 / 1080P / 960P / 720P|
|Supply voltage (V ac)||220V|
|Product weight (kg)||0.43|
|Package weight (kg)||0.85|
|Product Dimensions (Width x Depth x Height - cm)||21 x 20 x 4.3|
|Package Dimensions (Width x Depth x Height - cm)||29 x 26 x 9|
|Operating system||Embedded Linux|
|Warranty period (months)||12|
|Warranty from release (years)||3|
|USB interface type||2.0|
|Compatible operating systems||Microsoft Windows 7 / XP / Android / iPhone|
|System features||USB backup, simultaneous multi-channel real-time recording, playback, network operation, support Analog Camera, IP Camera, AHD Camera|
|User interface||Support 16-bit true color graphical menu interface and mouse operation|
|Camera view modes||1 or 4 screens|
|Video standards||PAL(625line, 50f/s); NTSC(525line, 60f/s)|
|Video display quality||Monitor: D1, VGA / HDMI: HD|
|Video playback quality||Max.1080P, under analog mode / AHDL(960H),D1,HD1,CIF,QCIF|
|Video channel type||AHDNH-1080N 4CH / AHDM-720P 4CH / AHDL-960H 4CH / AHDM-720P 2CH + IP 720P 2CH / IP1080P 4CH / IP 960P 12CH / IP720P 4CH|
|Video Motion Detect||Zones: 192 (16*12) detection zones, sensitivity: multi-level sensitivity (Only local channels)|
|Record mode||manual / alarm / motion detection / timing|
|Local playback||1~9 ch playback, Under analog mode 8*D1, up to 4 ch playback (4*D1@25fps)|
|Search modes||Time / calendar / event / channel search|
|Storage space occupation for video||CIF: 4~5G/day/channel; D1:8~10G/ day/channel; 720P 20G/day/channel; 960H 12~20G/day/channel|
|Storage space occupation for audio||691.2M/day/channel|
|Backup mode||Network backup, USB HDD, USB writer|
|Backup Type||3.5''HDD / Network|
|HDD Size||3.5 "|
|HDD is included||No|
|HDD Interface Type||SATA port (Max 4TB)|
|Alarm Action||Local Alarm|
|Video Input Interface||4ch BNC (1.0 Vp-p, 75Ω)|
|Video output||1 x VGA, 1 x HDMI 1920X1080 60Hz|
|Audio input||1ch RCA|
|Audio Output||1ch RCA|
|Network Interface||RJ45 10/100M|
|USB ports||2 x USB 2.0|
|Local cameras in||AHDNH / 1080N AHDM / 720P AHDL / 960H|
|IP cameras in||IP 1080P / IP 960P / IP 720P|
|IP Mode||Dynamic IP address|
|Power consumption (W)||15|
|Onvif / P2P||onvif2.0|
The best DVR AHD 1080N 4CH on the market! If you compare the technical specifications with the price you will understand this.
H.264 video compression, 1080P/720P / 960H HD resolution, VGA & HDMI output.
720P / 960H/1080P
Backup Via USB Drive + 3.5'' Hard disk (up to 4T) ( NO Hard disk in the package)
1 Audio in / 1ch audio out + 2pcs USB Port
P2P (cloud), no need any port forwarding for remote monitor anymore.
Smartphone, PC remote surveillance. APP Name: XMEye
Motion detection and email alarm
AHD 1080N 4CH CCTV DVR Mini DVR 5IN1 For CCTV Kit VGA HDMI Security System Mini NVR For 1080P IP Camera Onvif DVR H.264
Support AHD / CVBS / TVI / CVI / IP cameras
Notice: If you connect this DVR to your IP cameras, please make sure your IP cameras support onvif2.0
When motion is detected, the DVR can send email or start record to the hard disk without missing any important events.
Support multiple users simultaneously online viewing
Watch what you care anytime, anywhere
1* Mini 4/8 Channel DVR
1* USB Mouse
1* DC12V Power Adapter
1* User Manual
HDD is not included, Please choose the suitable HDD according your camera numbers and record time.
Record Time (Days)
Step1 – Power on devices and connect it online
Step2 – Get the Serial No / ID of the device
Enter to the Main Menu >> Info >> Version
The serial No it is very important. Somebody else can connect to your device remotely if they find this Serial No.
Step3 Using Internet Explorer go to the website: http://www.xmeye.net
Choose “By Device”, input the serial no. and username “admin” password is blank, and then choose main stream to view.
Step 4 View on the website
We provide some cameras for testing
Serial: 7d57c49ca9fc7b9d user: admin
Serial: 84d4644522cf0866 user: sectec (tested, is ok)
1.3MP 960P Serial no.: 822b014bf69bbb77
2.0MP 1080P Serial no.: c705ddef864bd0ed
1 – Video input from local cameras
2 – Audio output for speakers
3 – Audio in from microphone
4 – Ethernet for connection to local Lan
5 – Power connector DC 12V / 2A
6 – 2 x USB port for connecting keyboard, mouse and USB external HDD
7 – HDMI Port
8 – VGA Port
(Skip this if you don' t need storage):
Install the HDD
Connect to power, the indicator turns on, DVR boots up.
Note: Use matched adapter to avoid abnormal situation or damage.
Shut down power switch (some might have power switches)
To shut down the device, there are soft-Off and hard-off.
soft-Off: Go to <MainMenu>-<Logout>- <Shoutdown>
hard-off: Plug the power on the rear panel.
Note: Power recovery: When DVR is shut down abnormally, reboot it, all recordings will be saved automatically and restore to the previous status. Replace the HDD: Shut down the power before replacing.
When DVR boots up, the user must login and the system provides the corresponding functions with the user purview. There are two user settings. The names are admin by default. Admin is default with no password.
Password protection: If the password is continuously wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked. (Through rebooting or wait half an hour, the account will be unlocked automatically).
Go to Main Menu > System > Network , as follows:
IP address: default is 192.168.1.10;
Subnet Mask: default is 255.255.255.0;
Gateway : default is 192.168.1.1.
Note: IP address of the speed dome must share the same network segment with the router and conform to its IP instead of conflicting with other IP to ensure the device access to network; Go to Main menu > system > network, select DHCP Enable (Router should enable DHCP).
DVR must contain HDD, as follows:
Ater installing HDD, boot up the DVR, go to <main menu>-<Advanced>-<Storage> to format the HDD. Then set the HDD as read-write.
Note: At least one read-write disk is needed for normal recording.
Go to<main menu>-<record>-<Record Conf.>
<Channel> Choose the corresponding channel number. Choose the all option to set the entire channels.
<Redundancy> Choose the redundancy function to double backup the file.
<Length> Set the time length of each video file between 1min to 120min. 60 minutes is default value.
<Mode> Set video state: schedule, manual or stop.
Configuration: Record according to the set video type (common, detection) and time section.
Manual: Corresponding channel starts recording 24 hours non-stop.
Stop: Whatever state the channel is in, the corresponding channel recording stops when stop button is selected.
<Period> Set the time section of common recording. The recording will start only among the set range.
<Record type> Set recording type: regular, detection, alarm
Regular: Record according to the set time section. The video file type is "R".
Detect: Within the set time section, trigger the motion detect, video blind, video loss or abnormal analysis. When above alarm is set as opening recording, the recording detection state is on. The video file type is M.
There are two ways for you to play the video files in the HDD
In the right shortcut menu
Note: The HDD which saves the video files must be set as read-write or read-only state.
Time schedule options
Search by time / switch mode
Search by time
Double-click the file name to playback the video.
Note: Not all models support this function Go to <Main menu>-<system>-<Digital>- <Channel Type> configure, you can connect IP camera under pure network or hybrid network.
<search> Search and display the IP address within the same LAN, such as IPC, DVR and NVR. Choose one IP address, device name, type, IP address, port and protocol will be entered automatically.
<Protocol> Support NETTP, ONVIF and all. Default is all.
<ok> Click ok to finish adding, go back to digital channel interface, choose added monitoring device to preview.
When connected to the network, login DVR to start remote monitoring via IE brower
Open IE browser, enter IP address, take 192.168.1.10 as an example, input http: //192.168.1.10 to connect.
Enter user name and password. (default user name is admin, no password). Change the administrator password timely after login, as follows:
Note: Plug-ins need to be installed if you login via IE brower.IE is default to intercept plugin. Please set IE security level. Go to <internet options>-<security>-<Custom level…>
<ActiveX >, enable them all.
Or go to our official website to download and install plugins http://www.xmeye.net;
Or install IE plug-in _V22.214.171.124.exe via CD.
Cloud technology realizes one step on the Internet, which greatly facilitates the customers in public network monitoring. For first use, please start here. lf not ,just skip.
1. Enter http://xmeye.net to login
2. Install step by step according to the guides.
3. Click login to enter cloud service interface, as follows:
4. After successful configuration, wherever and whenever you are, as long as you can surf the Internet, you can get access to the device.
Login http://www.xmeye.net; Login with user name and password (user name: guest password:123).
5. Device list is on the left, click the device the preview.
Network environment: wifi, 3G
Mobile system: Android, IOS
Software Name: XMEye Software
Download: Google Market, app store
Note: When the device can access to the public network, you can realize public network monitoring via XMEye
If you've forgotten the admin account password, click the question mark next to the password then a "Key" code appears at the bottom of the window. You are communicating this code and we will send you the unlock password.
No customer reviews for the moment.